About the Landscape Juice Network

Founded in 2008. The Landscape Juice Network (LJN) is the largest and fastest growing professional landscaping and horticultural association in the United Kingdom.

LJN's professional business forum is unrivalled and open to anyone within within the UK landscape industry

LJN's Business Objectives Group (BOG) is for any Pro serious about building their business.

For the researching visitor there's a wealth of landscaping ideas, garden design ideas, lawn advice tips and advice about garden maintenance.

working with existing artificial grass surface.

Hi All 

I have been asked to quote on a job at a local nursery, they would like some play equipment installed on an existing artificial grass surface. This will involve cutting back the artificial turf and digging out several holes to set the legs of the equipment in. 

Does anybody have any experience of doing this, I take it the artificial grass will have to be stuck back with the same tape they join the rolls of turf together with. 

I have some concerns over the tension of the turf being affected by our cutting sections out as well as some concerns over getting a decent finish around the legs of the play equipment.

You need to be a member of Landscape Juice Network to add comments!

Join Landscape Juice Network

Votes: 0
Email me when people reply –

Replies

  • No experience here but is the surface suitable for a play area from a children's safety point of view?

  • No idea but they have been using it for quite a while, think I'm going to turn this job down though.

  • depends on what type of turf it is and what surface it is on. Some is held down by teh weight of sand brushed into it, and some is held down by pinning at the edges into wooden battens similar in principle to how a carpet is laid, or may be stuck down to a hard surface underneath if on concrete. If your putting holes in it for posts, then you should be fine to simply mark out the holes and cut through with a sharp stanley knife, dig the posts holes and job done. If you want to be belt and braces you can put a bead of the jointing compund around the edge of the turf if youve bought the concrete on the posts flush up to finish level.

  • We've been told that the area which may need to be cut will not be stretched due to the backing and when you re-seal the edges there is no special method, just re-seal with the backing tape and re-sand the area you've been working on. There is nothing to say the artificial grass is to be of a certain type, even in a public usage place.

    A shock pad, tested to a fall height, would be the only product used in a public play area wit artificial grass although, this is usually specified by local regulations or council specification

  • there is very little give in artificial turf in terms of stretching it anyway

  • thanks for the replies just found out that this job has already been fraught with problems and two parties involved cant agree on anything so I'm giving this a wide berth 

This reply was deleted.

Trade green waste centres

<!-- Google tag (gtag.js) --> <script async src="https://www.googletagmanager.com/gtag/js?id=G-WQ68WVXQ8K"></script> <script> window.dataLayer = window.dataLayer || []; function gtag(){dataLayer.push(arguments);} gtag('js', new Date()); gtag('config', 'G-WQ68WVXQ8K'); </script>

LJN Sponsor

Advertising