Founded in 2008. The Landscape Juice Network (LJN) is the largest and fastest growing professional landscaping and horticultural association in the United Kingdom.
LJN's professional business forum is unrivalled and open to anyone within within the UK landscape industry
LJN's Business Objectives Group (BOG) is for any Pro serious about building their business.
For the researching visitor there's a wealth of landscaping ideas, garden design ideas, lawn advice tips and advice about garden maintenance.
Replies
I am not familiar with the items that you require nor am I clear if the price you have been quoted is from the original equipment manufacturer or a local machinist. If however the price is from the original equipment supplier then it really would be worth taking one of the tines to a local machine shop. I worked as a buyer in an engineering company and if you didn't already know I can tell you there are some very skilled engineers who are able to revers engineer an item from a pattern. It is worth going around to a few shops as the price will vary depending if they have some spare material etc. Also, ensure to advise what you are using it for as you need to be using a suitable grade of steel. I would expect the price to be at least half as the typical mark up on resale is between times 2 to 3 on the purchase price.
I am still in contact with an extremely good machine shop so if you need any help then please let me know.
so contact allett and tell them what machine you have and ask if these part numbers are correct.....
SOLID TINES....RT00001300(12mm thick)
HOLLOW....RT00001301
sorry if these are not right,but the diagram was for a little willy and a big willy,the difference being the number needed