Founded in 2008. The Landscape Juice Network (LJN) is the largest and fastest growing professional landscaping and horticultural association in the United Kingdom.
LJN's professional business forum is unrivalled and open to anyone within within the UK landscape industry
LJN's Business Objectives Group (BOG) is for any Pro serious about building their business.
For the researching visitor there's a wealth of landscaping ideas, garden design ideas, lawn advice tips and advice about garden maintenance.
Replies
You might be able to fit one of these to your grease gun....... then undo the grease nipple from the machine and just press this into the hole where the nipple was. I use one to use on my Stihl stuff though I do drill the hole in the centre, out slightly to get more grease through https://www.ebay.co.uk/itm/CONICAL-GREASE-GUN-NIPPLE-CONNECTOR-LUMA...
Thanks Graham. If been looking at something similar . Might just change the nipple to an angled one for easier access.
this might work https://www.dropsa.com/en/fittings/grease-nipples/angled-grease-nip...
The handy thing with the "conical" connector is that you can tell when the gearbox is full as you can feel it lifting slightly off the hole in the machine gearbox............ with a grease nipple, you've no idea till it starts squeezing out various places... often where you don't really want it.