Important Notification from HSE - Use of chain flail/non standard accessories on brush cutters - Forum

Portable, hand-held, combustion engine driven brush cutters are commonly used for cutting weeds, brush and similar vegetation, and are frequently utilised in ground-clearance operations connected with construction work, using a variety of standard cutting attachments. The Health and Safety Executive (HSE) has become aware of a dangerous practice involving the fitting of non-standard accessories, not approved by the manufacturers, to brush cutting machines. In particular, HSE are aware of the UK supply of chain flail attachments comprising of a cutting head incorporating lengths of metal chain. This alert is relevant to any such metal brush cutter accessory manufactured or assembled from more than one component. Background: The safety alert arises from a fatal incident. Initial investigations indicate that a link from a chain flail attached to a brush cutter, struck a nearby worker in the head. In contrast with dedicated chain flail machinery, brush cutters typically lack the robust guarding arrangements required to control the risk from articles (including fragments of chain) being ejected with high energy. The guarding supplied with brush-cutters is predominantly aimed at protecting the operator from inadvertent contact with the cutting accessory. The fatal incident involved the use of a twin-chain attachment, similar designs have been encountered having 4 chains and one which utilises chainsaw type chains as the cutting implement. The presence of a CE mark should not be regarded as a reliable indication that such attachments are safe to use. Issues: Your browser may not support display of this image. The high output shaft speed of a brush cutter creates the potential for significant energy to be transferred to the cutter head. The chains affixed to non-standard cutter heads are subject to high stresses and impacts during normal use, and the risk from breakage and ejection of chain components at high speed is significant. The use of non-standard cutting attachments not approved by the manufacturer may, because of their geometry and mass, induce excessive stresses which could result in premature failure and possible break-up of the brush cutter, thereby increasing the risk of injury from any ejected component. Manufacturers' original cutting equipment such as nylon cords, metal cutting blades and saw blades are designed to be used in combination with specifically designed safeguarding systems. The chain flail attachments are not supplied with any compatible safeguard/deflector. The harmonised standard for specifying the safety requirements for such machinery, EN ISO 11806, excludes from its scope brush cutters equipped with metallic blades having more than one part (such as chain links.) Action required: Any brush cutters fitted with chain flail or similar non-standard attachments should be taken out of service immediately and the attachments removed and replaced with the manufacturer's approved accessory. Manufacturers' advice should be followed as to the appropriate combinations of cutting tools and guards. Such advice is typically available within the instruction books accompanying the machine.

Replies

Andy Thorne June 23, 2010 at 8:29pm

Thanks, I was aware of this from a month or so back and have never used any of this type of attachment.

Frighteningly, a practice that I often see other gardeners etc is that of using a nylon line brushcutter head with no blade at all fitted. I have never bothered to stop and speak with any of these users so don't know whether thay have delibrately removed the guard or it has been broken and not replaced.

IMO using any tool without the guards fitted, as supplied when new is negligent and shows little regard for the safety of the public, or the operative.

Please make sure that you always use a strimmer/brushcutter with a guard, whatever head you have on!