Forum

Replies

• 

  Ofer El-hashahar March 9, 2012 at 8:51pm

  I can recommend Phil, as professional and honest that like to assist.
• 

  Fenlandphil March 9, 2012 at 11:06pm

  Thanks for the kind comments Paul and Ofer.

  We don't do a lot of sheet metal work as we have very little of the right type of equipement, I assume you need a sheet steel trough type arrangement to plant in, if you want a frame you can line with polythene or put a trough in I can help directly.

  If it is a trough type container you need I suggest you try these people custom planters we had an enquiry for an arch to be bolted through trough planters at the base and these people were very helpful.

  The customer has gone ahead with the arch but not the planters so I have no direct experience beyond the enquiry stage with these people.

  I suggest you have it galvanised.

  If you get stuck then please contact me and I will do what I can to help.
• 

  Busy Bee Garden Services Limited March 12, 2012 at 6:38pm

  Many thanks Phil, i'll go back to them and I think the custom planters might work, the sticking point might be that they want an letter on each box but they look good as does the products on your site.
• 

  Marc October 23, 2012 at 6:53pm

  Hi all
  
  this may be a late reply, but in case anyone needs bespoke metal window boxes this is exactly what we specialize in. We can custom make them from galvanized steel of any reasonable size and powder coat with any RAL colour (for contemporary look we usually do them black). We are based in London, but are always keen to go further afield for an interesting project.
  
  Take a look at our website http://www.londonplanters.co.uk/windowboxes.html
• 

  Busy Bee Garden Services Limited October 24, 2012 at 6:46am

  Funny enough your not, the client is stil thinking about what they want, so I'll run it through with them again!
• PRO

  Phil Voice December 8, 2012 at 7:12pm

  How did this work out?