PRO Supplier

With the season fast approaching, an overwhelming number of greenkeepers made their way to the recent Dennis and SISIS Bowling Green Maintenance Seminar, in order to gain advice and tips on best practice. 

The popular seminars, which are designed to educate greenkeepers on how to maintain and look after bowling greens, have been credited for improving the greens at numerous bowls clubs throughout the country. Combining insightful seminars and practical tips, a number of industry experts take to the stage to discuss a wide range of key topics.

Held at the Herts Bowling Club in Watford, this most recent seminar attracted a phenomenal 80 greenkeepers.

After an introduction from Dennis and SISIS’ Robert Jack, the seminar welcomed the extremely knowledgeable sports turf consultant Alan Lewis, who drew upon his wealth of experience to deliver a presentation entitled ‘Spring Maintenance on a Bowling Green.’

Grass seed was the next topic of the day when Luke Hunt from Barenbrug UK advised delegates on how to choose the correct seed for their greens. 

A refreshment break allowed attendees to soak up and discuss the advice they had just received before John Noyce from Collier Turfcare took to the stage to offer an insightful look into ‘Chemical & Fertiliser options.’

The ever popular Turf Clinic followed and enabled all of the greenkeepers to ask their own questions to the panel of expert speakers. 

After a complimentary lunch, an on-green demonstration took place in which delegates got the opportunity to see a number of turf maintenance techniques in action. 

Kev Brazier, a contract greenkeeper working in partnership with Harpenden Bowls Club, felt that the seminar was a great opportunity to enhance his greenkeeping knowledge.

“It was a really informative seminar. The speakers had great knowledge and they presented it in a way in which everyone could understand. I was particularly interested in hearing that there is actually a place for Dwarf Ryes on bowling greens in certain situations.

“It was brilliant for networking and there was a broad range of subjects discussed. They were all incredibly relevant and I took a lot away from the spring maintenance tips.”

John Hay, Hertfordshire bowls greens co-ordinator, worked alongside Dennis & SISIS in arranging the seminar and felt that the day was a huge success.

“The seminar had a fantastic response and it was very timely because it has helped greenkeepers prepare for the season ahead. It was invaluable to all of the clubs that attended; the speakers were amazing, there were a few myths put to bed about what should and shouldn’t be done and there was a nice turf clinic which gave the greenkeepers the chance to speak their minds.

“Most of the people who attend these seminars are people who work voluntarily to support their clubs and therefore seminars like this can really make a big difference.”

Forthcoming seminars can be found below:

Tuesday 9 April - Hykeham Bowls Club, North Hykeham, Lincolnshire.

Wednesday 10 April - Ashbourne Bowls Club, Ashbourne, Derbyshire.

Thursday 11 April - Hewell Bowls Club, Redditch, Worcestershire.

To register for the FREE and highly informative seminars, please contact Roger Moore on 01332 824777 or email roger.moore@dennisuk.com.

Further information about the range of bowls maintenance products available can be found by visiting www.dennisuk.com / www.sisis.com

Votes: 0
E-mail me when people leave their comments –

You need to be a member of Landscape Juice Network to add comments!

Join Landscape Juice Network

Open forum activity

Jamie replied to Jamie's discussion Stihl BG86c problems
"Thank you for your replies. As it happens, i just re-alligned the ignition coil slightly just to get it slightly closer to the fly wheel as i noticed one side had a bigger gap than the other, and fingers crossed it's been ok today so far. It does…"
24 minutes ago
Honey Badger replied to Jamie's discussion Stihl BG86c problems
"Replace there wiring you've probably worn out the kill switch. If it is a flywheel problem stop yanking the pull chord so hard, thats what shears of the flywheel key. I've had three bg86 they get a bit unreliable after 4-5 yrs. They all still run,…"
3 hours ago
John F replied to John F's discussion Service Schedule Stihl Cordless Hedge Trimmer ?
"Thanks Tim for the useful information , definitely worth mentioning also useful reminder to grease the gears regularly  
I must admit I sometimes forget with my more expensive kit which has the grease thread the grease soons dries out .
My Stihl…"
5 hours ago
Honey Badger replied to Jamie's discussion Stihl BG86c problems
"Get the flywheel off is tricky. Strip down both sides of the machine there's two opposing compression nuts you have to loosen the one on the fly wheel side. Use a punch and hammer to gently slide of the compression nut, there's a centre point the…"
5 hours ago
Honey Badger replied to Jamie's discussion Stihl BG86c problems
"Use a piece of cut plastic milk bottle to get the space right between the ignition coil and flywheel. The flywheel could be the problem. There's key on the flywheel that shears off and knocks the engine timing off. You have to remove the flywheel…"
6 hours ago
Tim Bucknall replied to John F's discussion Service Schedule Stihl Cordless Hedge Trimmer ?
"All the stihl kit I've got has grub screws for greasing, and stihl do grease in tubes like toothpaste.  Take the screw out (torx) and screw the tube in, squeeze some in.  Should be done quite regularly.  Also on shaft drive machines you should take…"
7 hours ago
Jamie posted a discussion
Hi all, hope this is in the correct thread.So i've had some BG86c blower problems recently. Long story short, i've replaced the carb with a genuine Stihl carb as my previous one wasn't priming, everything was fine once replaced but on full throttle…
7 hours ago
Honey Badger replied to John F's discussion Cherry Blossom Tree
"If it's right by a boundary wall it sadly needs to come out. Cherries are one of the worst for causing subsidence. People Are such idiots when it comes to planting tree's."
yesterday
John F replied to John F's discussion Cherry Blossom Tree
"Yes it's not always easy to do the right thing for the tree unfortunately whoever planted it put the wrong tree in the wrong place right next to a boundary wall when it was just a small tree .
Once it's pruned I  can't see it adding any value as it…"
yesterday
Peter sellers replied to Ben Hattersley's discussion Pricing for School grounds maintenance
"Ben, seems that you are in a strong position as you are well thought of by the school as you aren't the obvious choice to quote for something which is not your main business. Are they asking other contractors who do this type of work to quote? If…"
yesterday
Ben Hattersley replied to Ben Hattersley's discussion Pricing for School grounds maintenance
"Yes it seems to be mine field! The school arent happy with the current contractors and to be honest i wouldn't be either. The main concerns of the school are that they are paying for the contract but very little gets done.
Because i try stay away…"
yesterday
Jim Mileman is now a member of Landscape Juice Network
yesterday
Honey Badger replied to John F's discussion Cherry Blossom Tree
"Can't say I've ever seen silver leaf in 22 yrs because I don't prune prunus in the winter. The only dease I've seen on cherry is a die back due to old age. With exception a fungal thing that was poor soil related and did recommend to customer not to…"
Wednesday
Noel Dempsey replied to John F's discussion Cherry Blossom Tree
"It's not advised to prune cherry trees until the weather is warmer to prevent disease."
Tuesday
John F replied to John F's discussion Service Schedule Stihl Cordless Hedge Trimmer ?
"Many Thanks everyone . Sorted now , just removed the 4 torx screws and lifted gear box cover , original grease a bit dried out so cleaned it up removed debris and re greased gears .
Screwed cover back on and works as it should .
A nice…"
Monday
Billybop replied to John F's discussion Service Schedule Stihl Cordless Hedge Trimmer ?
"hi John yes its definitely a diy job to me, and i am not mechanically minded whatsoever. The higher end HSA trimmers have actual greasing points where you take the bolt out and put the grease in. The less expensive models you unscrew the plastic…"
Sunday
More…

Stihl BG86c problems

Hi all, hope this is in the correct thread.So i've had some BG86c blower problems recently. Long story short, i've replaced the carb with a genuine Stihl carb as my previous one wasn't priming, everything was fine once replaced but on full throttle…

Read more…
4 Replies · Reply by Jamie 24 minutes ago
Views: 24