LOAD UP WITH MAKITA’S DCU602 BATTERY-POWERED WHEELBARROW

As part of the expansion of its LXT cordless range, Makita has unveiled the DCU602 four-wheeled battery-powered wheelbarrow, which boasts an increased maximum load capacity of up to 300kg on flat ground.

The DCU602 wheelbarrow is powered by two 18V LXT Li-Ion batteries in series, but up to four can be used if a longer runtime is required – of up to 100 minutes, where the operator can switch to the second pair of batteries when the first pair are depleted.

The model is equipped with a dump bucket which can be operated electronically or manually. Easily controlled, the wheelbarrow has three forward speeds – 1.5, 3.5 and 5 km/h – and one reverse; and is equipped with electric and electromagnetic brakes on top of a hand lever operated mechanical brake. A swivel lock also fixes the direction of the rear tyres. In addition, the DCU602 features head and taillights, as well as a warning beeper and level gauge.

Compared to petrol-powered alternatives, the DCU602 offers equivalent power – without the exhaust fumes and CO2 emissions – and is also silent running. The brushless motor is long-life and maintenance free and a battery protection circuit protects against overloading, over-discharging and over-heating.

Makita’s Marketing Manager, Kevin Brannigan, said: “The DCU602 is an ideal solution for landscapers and builders looking to reduce manual handling on site. The DCU602 offers them a powerful and dependable method of safely transporting materials, without the environmental drawbacks of petrol alternatives.”

To find out more about the DCU602 wheelbarrow and download its technical documents, visit: www.makitauk.com

"I have been using Melcourt Sylvagrow for a few years now. Bracken based & no wood fibre or crap within it. I tend to mix in some Perlite depending on what it is being used for. It was sold in 50Lt bags until last spring when they dropped 20% out,…"

"Hi Henry - Sounds like the starter motor is trying to turn the engine over but it has jammed. You could try freeing it off by rocking the machine backwards and forwards. It may work. Did for me on an Etesia 124. Good luck."

"I'm trying out Uncle Tom's Rose Tonic this year as well as Sulphur Rose and am keen to see the results. Obviously I can't recommend them yet, but will report back if they work. "