PRO Supplier

ICL introduces a revolutionary biodegradable coating technology for its controlled release fertilisers (CRF) in the turf market: eqo.s® technology.

The new coating for nitrogen is compliant with future (EU) fertiliser regulations, helping turf managers to improve their nutrient use efficiency (NUE) and will provide a solution for future sustainable turf management programmes.

With its patented eqo.s release technology, ICL takes the lead in providing a fully biodegradable coating that breaks down faster than existing coating technologies. The innovation will be introduced in ICL’s CRF portfolio for the turf segment, starting with the premium ranges Sierrablen and Sierrablen Plus.

In order to meet expected market demand, ICL has invested $20 million in a new production line for eqo.s release technology at its Heerlen facility in the Netherlands.

10934522099?profile=RESIZE_584xCRFs with eqo.s technology ensure optimal turf performance. The innovation is thoroughly tested in the field and has proven to be as reliable as current coatings, thus maintaining the high quality you can expect from ICL products. eqo.s release technology shows consistent and predictable nutrient release patterns while also limiting environmental impact by reducing nutrient losses and by increasing the NUE. After all nutrients are released, the coating degrades faster than ever before.

What turf professionals need to know

CRF products with eqo.s technology have the same advantages for turf professionals as current coating technologies as they improve the NUE and nutrient uptake by the plant. In addition:

  • Field trials with s prove similar, significant reduction in nitrogen leaching, volatilisation and denitrification.
  •  s shows improved growth and quality with reduced fertiliser inputs, as fewer applications are required versus conventional fertilisers.
  •  s shows the same consistent, reliable nutrient release for optimal growth.

Our CRF products are of the highest possible quality, and the technology we introduce today, eqo.s, works similar to the previous coating technologies, but with some key improvements”, confirms Dr Andy Owen, ICL lnternational Technical Manager Turf & Landscape. “The application rates and high quality results will remain, and even the look of the product is comparable. It is good news for turf managers and greenkeepers as their CRF products will give the same high performance as before. What makes it revolutionary is that the fully biodegradable eqo.s coating breaks down quicker and is completely compliant with future fertiliser regulations.”

 Spreading the eqo.s revolution

Though eqo.s technology will first be introduced into ICL’s premium CRF ranges of Sierrablen and Sierrablen Plus in 2023, ICL is confident that by, mid-2026, when the new biodegradability requirements will take effect on the EU market, the company will be able to provide fast biodegradable coatings for all its CRFs in the turf and landscape market.

Please contact ICL on 01473 237100 or visit www.icl-sf.co.uk or www.icl-sf.ie if you are in Ireland.

Votes: 0
E-mail me when people leave their comments –

You need to be a member of Landscape Juice Network to add comments!

Join Landscape Juice Network

Open forum activity

Oliver clarkson posted a discussion
Evening what products are people using for black spot on roses, I'm about to run out of my current product which isn't available any more. many thanks 
2 hours ago
Graham Taylor replied to Jamie's discussion Stihl BG86c problems
"I just use a couple of pieces of paper for the gap and then just rotate the flywheel to ensure its not rubbing anywhere.  I set it up when the magnets are pulling the coil onto it with the paper as a sandwich between the two..................holds…"
2 hours ago
Honey Badger replied to Jamie's discussion Stihl BG86c problems
"You're welcome. 
Im glad you got it working again."
4 hours ago
Jamie replied to Jamie's discussion Stihl BG86c problems
"Thank you for your replies. As it happens, i just re-alligned the ignition coil slightly just to get it slightly closer to the fly wheel as i noticed one side had a bigger gap than the other, and fingers crossed it's been ok today so far. It does…"
6 hours ago
Honey Badger replied to Jamie's discussion Stihl BG86c problems
"Replace there wiring you've probably worn out the kill switch. If it is a flywheel problem stop yanking the pull chord so hard, thats what shears of the flywheel key. I've had three bg86 they get a bit unreliable after 4-5 yrs. They all still run,…"
9 hours ago
John F replied to John F's discussion Service Schedule Stihl Cordless Hedge Trimmer ?
"Thanks Tim for the useful information , definitely worth mentioning also useful reminder to grease the gears regularly  
I must admit I sometimes forget with my more expensive kit which has the grease thread the grease soons dries out .
My Stihl…"
11 hours ago
Honey Badger replied to Jamie's discussion Stihl BG86c problems
"Get the flywheel off is tricky. Strip down both sides of the machine there's two opposing compression nuts you have to loosen the one on the fly wheel side. Use a punch and hammer to gently slide of the compression nut, there's a centre point the…"
11 hours ago
Honey Badger replied to Jamie's discussion Stihl BG86c problems
"Use a piece of cut plastic milk bottle to get the space right between the ignition coil and flywheel. The flywheel could be the problem. There's key on the flywheel that shears off and knocks the engine timing off. You have to remove the flywheel…"
12 hours ago
Tim Bucknall replied to John F's discussion Service Schedule Stihl Cordless Hedge Trimmer ?
"All the stihl kit I've got has grub screws for greasing, and stihl do grease in tubes like toothpaste.  Take the screw out (torx) and screw the tube in, squeeze some in.  Should be done quite regularly.  Also on shaft drive machines you should take…"
13 hours ago
Jamie posted a discussion
Hi all, hope this is in the correct thread.So i've had some BG86c blower problems recently. Long story short, i've replaced the carb with a genuine Stihl carb as my previous one wasn't priming, everything was fine once replaced but on full throttle…
13 hours ago
Honey Badger replied to John F's discussion Cherry Blossom Tree
"If it's right by a boundary wall it sadly needs to come out. Cherries are one of the worst for causing subsidence. People Are such idiots when it comes to planting tree's."
yesterday
John F replied to John F's discussion Cherry Blossom Tree
"Yes it's not always easy to do the right thing for the tree unfortunately whoever planted it put the wrong tree in the wrong place right next to a boundary wall when it was just a small tree .
Once it's pruned I  can't see it adding any value as it…"
yesterday
Peter sellers replied to Ben Hattersley's discussion Pricing for School grounds maintenance
"Ben, seems that you are in a strong position as you are well thought of by the school as you aren't the obvious choice to quote for something which is not your main business. Are they asking other contractors who do this type of work to quote? If…"
yesterday
Ben Hattersley replied to Ben Hattersley's discussion Pricing for School grounds maintenance
"Yes it seems to be mine field! The school arent happy with the current contractors and to be honest i wouldn't be either. The main concerns of the school are that they are paying for the contract but very little gets done.
Because i try stay away…"
Wednesday
Jim Mileman is now a member of Landscape Juice Network
Wednesday
Honey Badger replied to John F's discussion Cherry Blossom Tree
"Can't say I've ever seen silver leaf in 22 yrs because I don't prune prunus in the winter. The only dease I've seen on cherry is a die back due to old age. With exception a fungal thing that was poor soil related and did recommend to customer not to…"
Wednesday
More…

Stihl BG86c problems

Hi all, hope this is in the correct thread.So i've had some BG86c blower problems recently. Long story short, i've replaced the carb with a genuine Stihl carb as my previous one wasn't priming, everything was fine once replaced but on full throttle…

Read more…
6 Replies · Reply by Graham Taylor 2 hours ago
Views: 46