PRO Supplier

Mat Edwards, Course Manager at Looe Golf Club in Cornwall, claims that his new Hunter Irrigation system, supplied by KAR UK and installed by Full Circle Irrigation Ltd, has signalled instant improvements on the greens and approaches.

Designed by six times Open champion, Harry Vardon, Looe Golf Club is set in an area of breath-taking beauty. The panoramic views from the course are stunning; to the east are the peaks of Dartmoor and the Tamar estuary, to the south, Looe Island and the channel, to the west and north, glorious countryside and Cornish moors. The 18-hole course measuring 5,940 yards provides an excellent test of golf for all abilities.

Mat Edwards has been working at the club for six years, three of which have been as the Course Manager. Along with his three full-time greenkeepers, Mat has worked tirelessly to bring about some huge improvements to the course – which has not been unrecognised by the club’s members.

7386975696?profile=RESIZE_584xHowever, he claims that perhaps the biggest impact has been the result of the new Hunter Irrigation system which was recently installed. Which was much needed according to Mat.

“I knew that the previous system was just not up to scratch,” he said. “Some sprinklers wouldn’t work, there were a few leaks and I could not rely on it at all. Considering the prolonged periods of drought we have been experiencing over the past couple of years, it was imperative that we had a good irrigation system.

“Therefore, an appraisal on the system was carried out by Irritech Limited, and they basically condemned it.  I then showed the report to the club’s owner and he gave me the green light to push ahead with a new system.”

It was at this point that Mat met with Wesley Henshaw from KAR UK – distributors of Hunter Golf Irrigation who was introduced to the club by David Bevan of Agrovista Amenity. After being impressed by Wesley’s product knowledge, Looe Golf Club purchased a new system consisting of Hunter G885 Decoder-In-Head sprinklers to be controlled by the Hunter Pilot CCS PC-based central control system.

The G885 sprinklers boast one of the highest torque outputs on the market. With this, the gear drive will push through anything that gets in its way. With such a powerful core, an array of efficient nozzles, and true full/part circle capabilities, the G885 is relied on by many turf managers. Throw in the convenient serviceability of Total Top Service (TTS) and Decoder-In Head (DIH) technology, and you don’t just have the most powerful choice in rotors, you’ve got the most intelligent choice as well.

The Pilot CCS PC-based central control system is a PC-based software package that makes central control of large-scale irrigation systems affordable, usable, and comprehensible.

A new system was designed by Irritech Limited, who also compiled a materials specification and bill of quantities. This allowed a number of irrigation contractors to tender for the project.

After a competitive tender process, the installation contract was awarded to Full Circle Irrigation Ltd. All of the greens and six approaches were installed with the G885 sprinklers with pipe work installed to Tees as part of the on-going project.

7386983652?profile=RESIZE_584x“The system has had an instant impact and is already making a difference,” said Mat. “Within two weeks the grass on the greens had grown and lushed up more than I could have expected – and this was in a period where we didn’t have any rainfall for six weeks.

“These sprinklers really are powerful,” he continued. “The course here is very exposed because we are situated so high up, so I was worried about drift. But these sprinklers are not affected by the wind – the nozzles ensure that the water goes exactly where you want it to.

Furthermore, I can control the system through my phone so I can even operate it at home.

“One of the main reasons for purchasing this Hunter system was to try and improve the greens and now they will be stronger through the summer and healthier going into winter.

“It has been worth every penny as far as I’m concerned.”

As a part of this project, a Kasco 1HP 4400EAF Surface Aerator has also been installed to the back-up irrigation lake to improve the quality of the water.

The Kasco high performance surface aerator pushes high volumes of water into the air which increases the overall health of the water and keeps it thoroughly mixed. These self-contained units deliver up to 3.0 lbs of O2 per horsepower per hour of operation, making Kasco surface aerators the most dependable and efficient units on the market.

For more information, contact Wesley on wesley@karuk.com or visit www.karuk.com

Votes: 0
E-mail me when people leave their comments –

You need to be a member of Landscape Juice Network to add comments!

Join Landscape Juice Network

Open forum activity

Billybop replied to PAUL's discussion Small, compact battery strimmer with variable speed trigger?
"Hi your FSA60R is on the AK battery system? I use the AP system Stihl FSA85 which is just the ticket for the jobs you describe. Which offers infinitely variable speeds from barely turning, upwards. Mine must be about 10 to 15 years old now ( I have…"
6 hours ago
PAUL posted a discussion
I am looking for a small, compact, lightweight strimmer that is battery powered for small garden edging - I already have a Stihl FSA60R but its just a bit to powerful and unweldy for some of the smaller, finnicky edging. The strimmer MUST have…
7 hours ago
Nick @ NM Garden Services Ltd replied to Dan Nate's discussion Brendon 2000psi pressure washer
"We had a petrol washer and this electric one blows it out of the water!
https://kranzle-pressure-washers.co.uk/products/kranzle-quadro-11-1...
Benefits over the Brendon one are a longer hose spray hose (15m) , built in tank, uses someone elses power…"
8 hours ago
Andrew Bentley replied to Andrew Bentley's discussion Finding work
"Thanks Ian! "
15 hours ago
Ian Harvey replied to Andrew Bentley's discussion Finding work
"I would also look at the feasibility and cost of adding a tow arm and 2nd hand small trailer to your car. This instantly adds to your ability to undertake multiple tool jobs and to remove waste. A gardener in my area has been doing this for decades.…"
20 hours ago
Sean Clarke replied to crawford smith's discussion Brass trigger,lance and fittings on CP15 Evolution
"I have two sprayers, one with the brass Lance and the other with the plastic one. I have to say, I prefer using the brass one 'upside-down' with the anvil nozzles. It soon becomes very easy to use, requiring only downward pressure from the thumb -…"
21 hours ago
PGM posted a discussion
A question for those offering lawn treatments. Does anyone use a specific product, separate to their normal treatments, that's specifically used when we have long, dry periods? Can anyone recommend a good product? I imagine it would likely be a…
yesterday
Adam Woods replied to Andrew Bentley's discussion Finding work
"Good move Andrew... Get someone to proof read them before you use them, its so easy to miss obvious things, becasue you are so close to it - and preferably get them printed professionally..you would only need a few hundred
I started with a Honda…"
yesterday
Andrew Bentley replied to Andrew Bentley's discussion Finding work
"Thank you for your thoughts and support! 😊"
yesterday
Andrew Bentley replied to Andrew Bentley's discussion Finding work
"Thank you! I've changed the website a bit and simplified things.... I wasn't going to offer mowing as I'm operating out of a small car, but with hindsight I see I need to offer this! I use Ego battery kit and think I can get my mower in the car if I…"
yesterday
Andrew Bentley replied to Andrew Bentley's discussion Finding work
"Thank you for your constructive feedback! Not brutal at all... I have taken onboard what you are saying and changing things...😊"
yesterday
John F replied to Andrew Bentley's discussion Finding work
"Had a look at your website Andrew I feel your skill set will appeal to those discerning clients who will value your honesty and your integrity shines through .
Most likely they will have a fair sized property but they don't want to pay contractors…"
Monday
Peter sellers replied to Andrew Bentley's discussion Finding work
"Think you also have an issue with using your name as your trading style. It does not say what you do. Just put gardeners Winchester into google and you are not there. You need to trade as EG Bentley Garden Services for google to pick you up when…"
Monday
Dan Nate posted a discussion
So a couple of customers have asked for pressure washing and I saw the above machine for a good deal. Has anyone experience with it at all?It's a honda gx200 so not blazing power but with 13lpm should be OK for most smaller domestic jobs I assume. 
Monday
Adam Woods replied to Andrew Bentley's discussion Finding work
"Like "
Monday
Peter sellers replied to Andrew Bentley's discussion Finding work
"Andrew, following on from Adam's reply and having a look at your website I am struggling to see where your market is? 
Without coming across as a know it all and unless comments from members contradict me  the bulk of work is for grass mowing and…"
Monday
More…

Lawn Water Conserver

A question for those offering lawn treatments. Does anyone use a specific product, separate to their normal treatments, that's specifically used when we have long, dry periods? Can anyone recommend a good product? I imagine it would likely be a…

Read more…
0 Replies
Views: 15

Finding work

Hi everyone After a couple of years employed as Head of Horticulture for a charity, I decided to return to self employment as a freelance gardener at the end of March. I am struggling to find clients and don't know what to do! I have a website, a My…

Read more…
22 Replies · Reply by Andrew Bentley 15 hours ago
Views: 405