PRO Supplier

Etesia will be launching their range of Greener City Equipment on stand C050 at IOG SALTEX 2017, which includes a range of environmentally-friendly battery-powered pedestrian and ride-on rotary mowers.

Environmental protection and a commitment to sustainable development in general have always been among Etesia’s key concerns, even before they became the latest buzzwords.

That is why Etesia have developed their own philosophy called Bio Concept. It is reflected in the fact that environmental protection is addressed in all areas of the company and at every stage in the life of their equipment.

Taking centre stage at SALTEX 2017 will be the Buffalo 124 HVHPX four wheel drive ride-on mower and the Bahia M2E electric ride-on mower. The Buffalo 124 HVHPX is fitted with a 124-cm overlapping cutting deck and a 23-hp two-cylinder Briggs and Stratton Vanguard engine, and has a high hourly mowing output of up to 15,000 sqm. per hour.

The Bahia M2E is the world’s first fully electric ride-on cut and collect mower. Featuring all of the benefits of its petrol ‘brother’ which has made the Bahia a user favourite, with the added advantages of no odour, zero emissions, low noise, low vibrations, reduced maintenance costs and reduced health and safety issues for operators. This model has been developed around the chassis of the petrol-powered Bahia models and effectively has the same compact look with a cutting width of 80cm and grass box capacity of 240 litres. Power comes from 4 acid/lead batteries producing 48V, 115 ah and conveniently located under the operator’s seat which can be re-charged within six hours via a 16amp 200v power socket.

Also on show will be the complete range of battery-powered pedestrian mowers from the N-Ergy range. With mowers from 41cm-46cm cutting widths, push and single speed available, there is a mower suitable for everyone.

The exclusive Duocut cutting deck on the N-Ergy range is the perfect combination of 100 % collection and 100 % mulching decks. A very high collection performance thanks to the smooth inside of the deck. A full opening of the exit of the ejection channel which is favourable to the removal of grass cuttings without clogging in a 50-litre box – even in extreme weather conditions.

Completing the Greener City Equipment range on show is the revolutionary Donky 100% electric wheel barrow, which is available with a range of attachments to tackle a wide variety of jobs.

Visitors to stand C050 will also get the opportunity to see the new Bahia Hydro 80 MKHP4 E-Connect ride-on mower before it’s official launch in 2018.

New product brochures ahead of the 2018 season will also be available.

For further information, please contact Etesia UK on 01295 680120 or visit www.etesia.co.uk  

Votes: 0
E-mail me when people leave their comments –

You need to be a member of Landscape Juice Network to add comments!

Join Landscape Juice Network

Open forum activity

Oliver clarkson posted a discussion
Evening what products are people using for black spot on roses, I'm about to run out of my current product which isn't available any more. many thanks 
8 hours ago
Graham Taylor replied to Jamie's discussion Stihl BG86c problems
"I just use a couple of pieces of paper for the gap and then just rotate the flywheel to ensure its not rubbing anywhere.  I set it up when the magnets are pulling the coil onto it with the paper as a sandwich between the two..................holds…"
8 hours ago
Honey Badger replied to Jamie's discussion Stihl BG86c problems
"You're welcome. 
Im glad you got it working again."
10 hours ago
Jamie replied to Jamie's discussion Stihl BG86c problems
"Thank you for your replies. As it happens, i just re-alligned the ignition coil slightly just to get it slightly closer to the fly wheel as i noticed one side had a bigger gap than the other, and fingers crossed it's been ok today so far. It does…"
12 hours ago
Honey Badger replied to Jamie's discussion Stihl BG86c problems
"Replace there wiring you've probably worn out the kill switch. If it is a flywheel problem stop yanking the pull chord so hard, thats what shears of the flywheel key. I've had three bg86 they get a bit unreliable after 4-5 yrs. They all still run,…"
15 hours ago
John F replied to John F's discussion Service Schedule Stihl Cordless Hedge Trimmer ?
"Thanks Tim for the useful information , definitely worth mentioning also useful reminder to grease the gears regularly  
I must admit I sometimes forget with my more expensive kit which has the grease thread the grease soons dries out .
My Stihl…"
17 hours ago
Honey Badger replied to Jamie's discussion Stihl BG86c problems
"Get the flywheel off is tricky. Strip down both sides of the machine there's two opposing compression nuts you have to loosen the one on the fly wheel side. Use a punch and hammer to gently slide of the compression nut, there's a centre point the…"
17 hours ago
Honey Badger replied to Jamie's discussion Stihl BG86c problems
"Use a piece of cut plastic milk bottle to get the space right between the ignition coil and flywheel. The flywheel could be the problem. There's key on the flywheel that shears off and knocks the engine timing off. You have to remove the flywheel…"
17 hours ago
Tim Bucknall replied to John F's discussion Service Schedule Stihl Cordless Hedge Trimmer ?
"All the stihl kit I've got has grub screws for greasing, and stihl do grease in tubes like toothpaste.  Take the screw out (torx) and screw the tube in, squeeze some in.  Should be done quite regularly.  Also on shaft drive machines you should take…"
18 hours ago
Jamie posted a discussion
Hi all, hope this is in the correct thread.So i've had some BG86c blower problems recently. Long story short, i've replaced the carb with a genuine Stihl carb as my previous one wasn't priming, everything was fine once replaced but on full throttle…
19 hours ago
Honey Badger replied to John F's discussion Cherry Blossom Tree
"If it's right by a boundary wall it sadly needs to come out. Cherries are one of the worst for causing subsidence. People Are such idiots when it comes to planting tree's."
yesterday
John F replied to John F's discussion Cherry Blossom Tree
"Yes it's not always easy to do the right thing for the tree unfortunately whoever planted it put the wrong tree in the wrong place right next to a boundary wall when it was just a small tree .
Once it's pruned I  can't see it adding any value as it…"
yesterday
Peter sellers replied to Ben Hattersley's discussion Pricing for School grounds maintenance
"Ben, seems that you are in a strong position as you are well thought of by the school as you aren't the obvious choice to quote for something which is not your main business. Are they asking other contractors who do this type of work to quote? If…"
yesterday
Ben Hattersley replied to Ben Hattersley's discussion Pricing for School grounds maintenance
"Yes it seems to be mine field! The school arent happy with the current contractors and to be honest i wouldn't be either. The main concerns of the school are that they are paying for the contract but very little gets done.
Because i try stay away…"
Wednesday
Jim Mileman is now a member of Landscape Juice Network
Wednesday
Honey Badger replied to John F's discussion Cherry Blossom Tree
"Can't say I've ever seen silver leaf in 22 yrs because I don't prune prunus in the winter. The only dease I've seen on cherry is a die back due to old age. With exception a fungal thing that was poor soil related and did recommend to customer not to…"
Wednesday
More…

Stihl BG86c problems

Hi all, hope this is in the correct thread.So i've had some BG86c blower problems recently. Long story short, i've replaced the carb with a genuine Stihl carb as my previous one wasn't priming, everything was fine once replaced but on full throttle…

Read more…
6 Replies · Reply by Graham Taylor 8 hours ago
Views: 53