PRO Supplier

Midlothian Council making an impact with Pellenc

Midlothian may be one of the smallest councils in Scotland, but it is certainly making a big impact with a little help from a range of Pellenc battery-powered equipment.  

“I think we are the second smallest local authority by area in Scotland,” said Jim Hay, Grounds Maintenance Manager for Midlothian Council. “However, as far as we are aware we have more electric equipment than any of the other councils and we’re trying to lead the way in this respect.”

From managing teams to choosing equipment, Jim is responsible for overseeing the maintenance of all the grounds and green spaces throughout Midlothian. One of his biggest responsibilities is the health and safety of the personnel who are operating grounds maintenance equipment, and it is for this very reason that he first started exploring battery-powered technology.

“We identified that the Hand-Arm Vibration (HAV) measurements on the majority of our petrol equipment were not ideal and felt that battery-powered machinery was the solution,” said Jim. “For this reason, we looked at a wide-range of equipment from various manufacturers. Unfortunately, we found that most of the equipment was not to a professional standard – it appeared to be more suited to domestic use.

10147624867?profile=RESIZE_584x“Pellenc however, was different. As far as we are concerned, Pellenc is by far the best professional equipment in the battery-powered market.”

A forerunner when it comes to lithium-ion technology, Pellenc has established itself as the number one choice in the ‘zero emission’ professional power tools market for the maintenance of urban and green-spaces.

Light, odourless, noise-free, with no starting problems and enough power to enable professional users to work for a full day on a single charge, it’s no wonder more and more professional users are turning to Pellenc. It is an attractive alternative to those who have, for several years, been relying on fuel-based machinery.

A demonstration was arranged through Pellenc dealer Agrovista Amenity, and Midlothian Council purchased a wide range of Pellenc products which included Rasion pedestrian mowers, Helion hedge trimmers, Selion chainsaws, Excelion grass strimmers and Airion blowers.

The equipment is already making a positive difference in many areas throughout the borough of Midlothian as Jim explained.

“The Pellenc tools are used in a lot of the local schools because we can operate them when classes are on or when exams are in progress, due to how quiet the machinery is. It’s the same when we work close to residential homes or the public in general.

“Aside from the equipment being so quiet it is just so much easier and more comfortable for the staff. With our old petrol machinery, they could only use it for three hours at a time because of the HAV levels, but they can use the Pellenc tools all day. The battery life is excellent, and we can run them all day if needed.

“I’ve had nothing but positive feedback from everyone using it.”

Jim claims that his experience has been boosted by the dedicated Pellenc technical centre – which was launched after Agrovista Amenity joined forces with Edinburgh City Council. It means that customers like Jim, have access to dedicated Pellenc operatives who have been fully trained at the state-of-the-art Pellenc factory in Pertuis, France.

“We have definitely benefited from the Pellenc service centre,” he said. “Whenever I need a machine serviced, looking at, or need any advice then I can just call the team there. It’s a fantastic service and when the Pellenc equipment goes in for a service it is always returned very quickly.”

Jim feels that the purchase of the Pellenc equipment is another step in the right direction for Midlothian Council. 

“The public are becoming more ‘green aware’ – and we are doing our utmost to boost our green credentials. We first started investing in electric equipment five years ago we are proud of what we have achieved already.

“Going forward we are keen to record the savings in CO2 emissions from this change in power source to further demonstrate our green credentials. We are already telling people to keep their eyes peeled because we have more electric equipment coming.”

Pellenc is distributed exclusively in the UK by Etesia UK.

For further information, please contact Etesia UK on 01295 680120 or visit www.pellencuk.com

Votes: 0
E-mail me when people leave their comments –

You need to be a member of Landscape Juice Network to add comments!

Join Landscape Juice Network

Open forum activity

Andrew Betteridge replied to Jason Taylor's discussion Lawn / soil problem
"Tiller or rotavator, it still the same mud.
Ten ton of the council soil improver from the household recycling mixed in with it would help, don't call it compost because it's not.
Edit- looking at the photo again, make it at least twenty tons."
20 hours ago
Peter sellers replied to Jason Taylor's discussion Lawn / soil problem
"Don't think you are paying attention, the original post was from Jason Taylor, I did not post the photo nor ask for any suggestions all I was doing was defending Jason's position in response to your unhelpful comments"
yesterday
Honey Badger replied to Jason Taylor's discussion Lawn / soil problem
"Sorry Peter I have to go the distance. I own a tiller it will cut a foot, its bloody hard work and slow. I bet above is at least six passes. Large areas like that I'd hire a cannon. 3/4 passes it would cut to a foot and leave a fine tilth rather…"
yesterday
Distance replied to Jason Taylor's discussion Lawn / soil problem
"Not how I describe it, it's what it is, a tiller. And and do me a favour 😆  nobody is criticising your work, I'm criticising the ineffectiveness of that tool. I can see it in the picture you have posted. You have posted asking for any suggestions.…"
yesterday
Peter sellers replied to Jason Taylor's discussion Lawn / soil problem
"Sorry to be blunt but we have cultivated many acres with what you describe as a tiller over the last 40 years without the need to hire a rear tine rotovator, it's unfair to criticise someone elses work without knowing the circumstances and not what…"
yesterday
Distance replied to Jason Taylor's discussion Lawn / soil problem
"Sorry to be blunt. But my bugbear is people referring to pathetic tillers as rotavators. "
yesterday
Distance replied to Jason Taylor's discussion Lawn / soil problem
"Sorry but a Stihl mh585 is a tiller not a rotavator. Something I would use at the allotment not on a professional job. Something like a Barretto 13hp you can hire for £100 a day is a proper rotavator and will go deeper and turn all those clumps to…"
yesterday
Distance is now a member of Landscape Juice Network
yesterday
Fusion Media posted a blog post
Agrovista Amenity is enhancing its line marking capabilities with a major investment in robotic technology and key industry appointments. As part of this strategy, the company has secured an exclusive partnership with XDC Autonomous Solutions for…
Wednesday
M Olsson posted a discussion
Hi people,Last year I bought several pieces of equipment including a TF 325 tiller. It's been built but never used, infact- I haven't even put oil or petrol in it, nor have I started it. It's been sitting in my shed since September last year. If…
Tuesday
Adam Woods replied to Dan Nate's discussion Charging Stihl tools from the van
"Thats exactly what I did for about 6 years... unplug it when not in use, and get them all charging when driving between jobs"
Tuesday
Fusion Media posted a blog post
Etesia UK recently welcomed dealers from across the UK and Ireland to an insightful and engaging dealer day at Primrose Hill Farm in Oxfordshire. Attendees gathered to explore Etesia’s latest product innovations, gain industry insights, and connect…
Tuesday
Fusion Media posted a blog post
Agrovista Amenity is pleased to announce its appointment as an approved distributor of Lanzarta, the newly authorised solution for controlling Hylobius abietis (large pine weevil) in Sitka spruce and other pine woodland.The recent Emergency…
Tuesday
Dan Nate replied to Dan Nate's discussion Charging Stihl tools from the van
" Thanks gents - I was thinking an inverter from the cigarette ligher might work but then, as Nick says, I was also thinking it might be electrically dubious."
Tuesday
Billybop replied to Dan Nate's discussion Charging Stihl tools from the van
"As Nick says, best just to buy more battery packs. The other option would be to take some kind of rechargeable mains voltage power bank to run a charger from. But that also could end up being more trouble than it's worth"
Tuesday
Nick @ NM Garden Services Ltd replied to Dan Nate's discussion Charging Stihl tools from the van
"You need a pure sine wave inverter. We did fit 2 vans out with them, wired into the battery and with the correct fuses.
They would happily run a van battery flat if you're not careful despite a low voltage cut off and one inverter caught fire when…"
Monday
More…