A Barnstaple construction company has been fined for safety failings after a ground worker was seriously injured when he stumbled from an excavator and fell down a five metre bank at a construction site in Middle Marwood.

The 65-year-old, who does not want to be named, suffered three fractured vertebrae, broken ribs and sternum, lung damage and a head wound that required stitches in the incident at a cottage undergoing renovation on 6 October 2011.

He was in intensive care for three weeks, has yet to make a full recovery and is unlikely to work again.

Barnstaple Magistrates' Court heard today (20 March) that his employer, G Loosemore and Son Ltd, had been contracted to build a two-storey extension at the rear of a cottage.

The ground worker was engaged in excavation work on land that sloped steeply upwards. An investigation by the Health and Safety Executive (HSE) found that his excavator was working on a level of ground at approximately roof height with the cottage in order to dig out material to make way for a terrace area and exterior steps leading to upper garden levels.

He needed to change the excavator's bucket during the work, but as he exited the cab he stumbled. He tried to steady himself by grabbing hold of a handle attached to the lift arm, but it came away in his hand and he fell approximately five metres down a slope and onto the path behind the cottage. He hit his head on a large stone as he fell and was knocked unconscious.

HSE established that there was no edge protection to prevent a fall to the area behind the cottage, and no steps were taken to support the excavation prior to the later installation of a supporting wall. The investigation also identified that there had been several falls of material from the main excavation area before the worker fell. These should have served as a warning, but no action was taken.

A Prohibition Notice was subsequently served to prevent any further excavation work at the site until a competent person had made an assessment and provided a safe system of work.

G Loosemore & Son Ltd, of Roundswell Business Park, Barnstaple, Devon, was fined a total of £12,000 and ordered to pay £11,210 in costs after pleading guilty to breaches of the Work at Height Regulations 2005 and the Construction (Design and Management) Regulations 2007.

Speaking after the hearing, HSE Inspector Annette Walker said:

"The dangers of working at height without adequate edge protection, and the risks associated with excavation collapse, are very clear. Yet companies and individuals continue to take risks and cut corners.

"In this case, significant harm occurred in respect of a fall from height. G Loosemore & Son Ltd could and should have done more to prevent the fall from the top of the bank, but this was only addressed as a consequence of the incident.

"There were a number of collapses of material prior to the fall that should have prompted the company to take earlier action, but these warnings were ignored. It illustrated there were serious risks, but they were disregarded.

"Today's prosecution should remind all involved in excavation work, or general work at height, of their legal duties to safely manage activity and provide the necessary protection."

Further information about working safely at height can be found on the HSE website at www.hse.gov.uk/falls. Information on excavation safety can be found atwww.hse.gov.uk/construction

Votes: 0
E-mail me when people leave their comments –

You need to be a member of Landscape Juice Network to add comments!

Join Landscape Juice Network

Open forum activity

Jason Taylor posted a discussion
Hello all,my son has started a landscaping business. He's had a few jobs. The one we priced and is working on is a new build. The garden is pretty big, about 450m2.Our quote was to seed it, plant a hedge at the back and create a border around with…
7 hours ago
Jason Taylor, Dan Nate and Wayne Morrison joined Landscape Juice Network
8 hours ago
Fusion Media posted a blog post
APB Treecare, a family-run tree care business based in Enniscorthy, Co. Wexford, has been steadily growing since its establishment in 2014 by Tony Boland.Specialising in tree surgery, tree removals, and surveys, the company serves both commercial…
yesterday
Tom Lark is now a member of Landscape Juice Network
Wednesday
Honey Badger replied to David Benson's discussion things arnt going to work very well
"I do"
Wednesday
Andrew Betteridge replied to Gary RK's discussion The right cutting attachment for the job - Stihl
"Will I notice the difference?"
Wednesday
Peter sellers replied to David Benson's discussion things arnt going to work very well
"Think you need to have a word with Starmer and ask him what he is doing about Drax, as noted in my previous post along with when he is swapping his 5lt Range Rover for an EV !"
Wednesday
Tim Bucknall replied to David Benson's discussion things arnt going to work very well
"Scientists come up with all sorts of things becauser they find them interesting.  Capitalists then work out how to monetise the profitable ones.
 
Blame capitalism, not science."
Wednesday
Tim Bucknall replied to David Benson's discussion things arnt going to work very well
"less than 2% of emissions, from 1% of the global population.  Add to that the fact that a) we've offshored a lot of our emissions by buying products from China instead of making what we need, and b) that we'd put millions of tonnes into the…"
Wednesday
stephen widman is now a member of Landscape Juice Network
Tuesday
Honey Badger replied to robert pryor's discussion Battery hedgcutter advice
"STIHL_2024_Battery_Working_Time.pdf"
Tuesday
Peter sellers replied to robert pryor's discussion Battery hedgcutter advice
"From what I can see the petrol hedgecutters weigh and cost less than  equivalent battery model and no runtime issues, they are not there yet."
Tuesday
Tim Bucknall replied to robert pryor's discussion Battery hedgcutter advice
"What run time do you get with the AP200?
 "
Monday
James Brett replied to robert pryor's discussion Battery hedgcutter advice
"Just seen this post and wanted to add that the Stihl HSA100 and AP200s batteries are a great combo. Yes about 4.9kg but with minimal vibrations it is actually a joy to use for long periods of time. If you wanted to reduce the weight they do a belt…"
Sunday
Billybop replied to David Benson's discussion things arnt going to work very well
"Yes been following Barrie's videos for a while, he talks a lot of sense. Another good channel is EV Carnage. The depreciation plus time wasted hanging around charging instead of working, is terrifying. I am a big user of battery garden kit, the…"
Sunday
Peter sellers replied to Peter sellers's discussion High lift non gen blades
"Thanks"
Sunday
More…

Lawn / soil problem

Hello all,my son has started a landscaping business. He's had a few jobs. The one we priced and is working on is a new build. The garden is pretty big, about 450m2.Our quote was to seed it, plant a hedge at the back and create a border around with…

Read more…
0 Replies
Views: 21

Honda or Masport?

Looking for lightish roller mower, not battery!Anyone using Honda 476 QY 19 inch or Masport rotorla 22 inch ? Both similar weight, looking at the Masport don't like the handle bracing bar which runs between the 2 vertical handles and looks like it…

Read more…
3 Replies · Reply by Peter sellers Mar 18
Views: 125

Hole saw set

Anyone recommend a hole saw set, want a set in a case to stop walkies. Needs to cut steel and stainless , can't justify Starrett cost. Need a selection of sizes with arbours.Only occasional use numerous choices on net but difficult to know if any…

Read more…
0 Replies
Views: 25