LJN Blog Posts

PRO Supplier

Etesia UK, the distributor of Pellenc battery-powered tools in the UK and Ireland, has announced a special offer which will see customers save up to 50% of the purchase price of the ULiB1100 battery.

A forerunner when it comes to lithium-ion technology and high efficiency “Brushless” motors, Pellenc has established itself as the number one choice in the “Zero Emission” professional power tools market for the maintenance of urban and green-spaces.

The combination of these two technologies makes it possible to eliminate direct emission of greenhouse gases and significantly reduce noise and vibration. It meets the users’ requirements for comfort and sustainability while offering excellent cost efficiency.

The Pellenc ULiB 1100 battery is equivalent to approximately 4,700 litres of fuel, at £1.18 per litre (as of 8.9.17) meaning that over the lifetime of the battery, users will be able to save up to £2775 when compared to petrol alternatives.

In addition to the above savings, from 1st November 2017 to 31st March 2018, users will also be able to save up to 50% of the cost of the purchase price of the battery.

With limitless options of commercial tools for commercial users available from hedgecutters to blowers, strimmers to pedestrian mowers – all powered by the ULiB 1100 battery which offers up to 1440 minutes of use on a single charge.

When purchased with one tool, customers will receive 10% discount on the purchase price of the battery. When two tools are purchased, customers will receive 20% discount on the battery. Three tools = 30% discount on the battery, four tools = 40% discount on the battery and 5 tools = 50% discount on the battery.

Pellenc supply tools and a range of batteries which are IP54 water rated and carry a full three-year commercial warranty - the first manufacturer to offer this on battery-powered tools, meaning that customers will have full peace of mind.

For further information, please contact Etesia UK on 01295 680120 or visit www.etesia.co.uk  where you can also find more information on Pellenc which is sold exclusively in the UK by Etesia UK.

You need to be a member of Landscape Juice Network to add comments!

Join Landscape Juice Network

Highlighted blog posts

Open forum activity

Green and Pleasant updated their profile photo
5 hours ago
Seth Burgess replied to Matt Hallett's discussion Stiga Twin Clip Mowers
"I use a Stiga Twinclip 55 (the 3 in 1) and it mulches as good as any dedicated mulcher I've ever used. I highly rate them."
9 hours ago
Graeme Brown replied to Matt Hallett's discussion Stiga Twin Clip Mowers
"I have the husqi mulch mower as well a great work horse. Keep the blade really sharp and the finish is excellent."
19 hours ago
Angela Sharp replied to Darren Walters's discussion Keeping up with doing quotes
"I don't know what sort of range of jobs you are quoting for but I base what I do on the amount of time it's going to take. Most people would say you should over-estimate time if you are quoting for tasks, that's partly why I quote for number of hour…"
22 hours ago
Angela Sharp replied to Oliver clarkson's discussion Apple tree repair
" Shame about this one, but most apple trees which you can expect a crop from can be quite young so it's certainly worth replanting and starting again. If the client invests in a reasonable size tree it'll be cropping in no time. "
yesterday
Anthony Toop updated their profile
yesterday
Anthony Toop replied to Jason Creed's discussion Resin Cleaner
"Ive used the spray on brake cleaner in the past, but more as a major clean up before applying lubricant, it works well but leaves the blades bone dry as it removes oil and grease obviously.It's ok on plastic and rubber as its designed to be non aggr…"
yesterday
John Fulton replied to Craig Campbell's discussion How did you start?
"Nice one Graeme , I know there is a saying  '' fail to plan''  and you '' plan to fail ''  obviously some truth in this but I have found in business the best opportunities and catalysts which have come my way have been down to chance meetings and fi…"
yesterday
Lee Foster replied to Oliver clarkson's discussion Apple tree repair
" Definately remove and re-plant.
It is always a shame when a nursery is prepared to let someone buy a poor specimin like this in the first place - at least if you go and choose one, you will make sure it does not have co-dominent leaders!"
yesterday
John Fulton replied to Jason Creed's discussion Resin Cleaner
"Just recently purchased a new Stihl Hedge trimmer and had opted for Motor bike chain cleaner OXZ ring compatible which i intend to spray onto the blades after use , It's supposed to blast off contaminants in seconds and stubborn areas can be brushed…"
yesterday
Mike Lish left a comment for Mike Lish
"Thanks for that Phil. It gave me the opportunity to revise.  Sorry to learn of your condition. Hope you are on the mend."
yesterday
Mike Lish replied to Mike Lish's discussion Tethering A Runaway
"Thanks for that Gary, what a good idea.  I have looked at some draw bar springs but they are the wrong configuration. Perhaps as you suggest trailer manufactrurers may be able to point me in the right direction."
yesterday
Gary RK replied to Mike Lish's discussion Tethering A Runaway
"I'd talk to one of the UK trailer manufactures - IforW or Wessex Trailers.
They build to spec and/or customise trailers and will probably have come across a similar requirement, so may be able to size/supply ?
 "
yesterday
Mike Lish replied to Mike Lish's discussion Tethering A Runaway
"Further, if the winch cable was in use as a tether while the machine broke away from its own drive while on the ramps , it's momentum and weight will probably tear out the anchor points.  Having said that, I am currently trying to source a suitably…"
yesterday
Matt Hallett replied to Matt Hallett's discussion Stiga Twin Clip Mowers
"Agree ive got the orginal Klippo version before Husqvarna brought them over. Bullett proof"
yesterday
Mike Lish replied to Mike Lish's discussion Tethering A Runaway
"Hi Gary,
I fixed a 12V winch permanantly  to the stump grinder, as well as my own anchor point design next to the van's bulkhead several years ago.  The cabled anchor point secures the machine whilebeing  transported, and has been used to pull the m…"
yesterday
More…

Tethering A Runaway

I have been specialising in stump grinding for the past 18 years throughout Anglia.  Over that time period I have experienced  loss of drive to the wheels on a number of occassions while on site (a real bummer) and twice while up/down loading from…

Read more…
5 Replies · Reply by Mike Lish yesterday