LJN Blog Posts

PRO Supplier

Pellenc Launches the Rasion Easy Pedestrian Mower

Following the successful launch of the Pellenc Rasion Basic and Smart models in 2015, the company has announced the latest pedestrian rotary mower in the range - the Pellenc Rasion Easy.

The Rasion Easy is a combination of the previous two models launched last year as Etesia UK operations director Les Malin explains: “We found that the manual operation of the Rasion Basic has been more appropriate to commercial operators yet they also liked the self-propelled element of the Rasion Smart. For this reason, Pellenc has launched the Rasion Easy – a combination from both of the previous models.”

The Rasion Easy has an IP54 water rating, which as time goes on will be the standard through the rest of the Pellenc tool range, and features a grass density detector - a patented feature exclusive to Pellenc which allows the mower to detect the height and density of the grass and change the engine speed accordingly. This saves power as operators do not have to run the machine under full-load unnecessarily.

A cutting width of 60cm with height of cut between 25-75mm, 70 litre grass box capacity and two front swivel wheels ensure the Rasion Easy is ultra-manoeuvrable. Weighing less than 30kgs and folding handlebars means that transportation between sites is effortless.

All Pellenc batteries and tools come complete with a three year commercial warranty as standard - the first manufacturer to offer this on battery-powered tools. Pellenc is exclusively distributed in the UK and Ireland by Etesia UK.

For further information, please contact Etesia UK on 01295 680120 or visit www.etesia.co.uk

For more news, reviews and insightful views, you can follow Etesia UK on Twitter @EtesiaUK and like the company’s Facebook page – www.facebook.com/EtesiaUK. You can also view the latest Etesia videos by visiting www.youtube.com/EtesiaUK.

You need to be a member of Landscape Juice Network to add comments!

Join Landscape Juice Network

Highlighted blog posts

Open forum activity

David Benson replied to Neil Brown's discussion Customer Complaints
"it might be the photo but the front copings seem loose. The point ing dos not seem to desperate its mainley salts coming out of the bricks/morter a good stif brush will clear it off and has  the pond have a overflow as all the heavy wet wether we ha…"
3 hours ago
Andrew Betteridge replied to Neil Brown's discussion Customer Complaints
"That wasn’t what I was expecting, I was expecting to see the mortar crumbling.
With the grass  being artificial I would try washing the wall with white vinegar and water, then something a bit stronger if that doesn’t shift it.
It is a very common pr…"
3 hours ago
Andrew Betteridge replied to Neil Brown's discussion Customer Complaints
"I posted a link to a NHBC guide, but it has to be passed by the moderator as it may be spam.
Try a internet search “NHBC efflorescence”
Not a problem for you to worry about.
 Andy "
3 hours ago
Andrew Betteridge replied to Neil Brown's discussion Customer Complaints
3 hours ago
Neil Brown replied to Neil Brown's discussion Customer Complaints
"The internal wall is solid concrete blocks 
 "
3 hours ago
Neil Brown replied to Neil Brown's discussion Customer Complaints
"Hi All thanks for answers to date 
i have attached a photo of the wall in question 
The grass around the base is artificial which i installed at a later date 
 "
3 hours ago
David Benson replied to Trevor Stephens's discussion Cables around gardens
"its got to the point now that i think you have to put a disclamer on them as there is that menny about, cable tv and phone not installed to BS, its one of my pet hates i even came accross one that came out of the footpath and over the pin curb "
3 hours ago
David Benson replied to David Green's discussion Removing Stumps - small tree/large bush
"as PG says easier if there is 2-3 ft to pull at above ground i dig round the root with a spit and cut the roots with a axe and a old pruning saw and loppers till you can start getting unserneath to the tap root DO NOT use a chain saw in the ground i…"
4 hours ago
Dave Colton replied to David Green's discussion Removing Stumps - small tree/large bush
"mattock and digging bar are my tools of choice when it comes to stumps, i also have a 5ft pry bar and a 1/4 sleeper for leverage, bloody hard work but works everytime."
5 hours ago
Liam Nash replied to Liam Nash's discussion What is this?
"Thanks found the part on the site however not in stock and doesnt have a part number but shall call Honda tomorrow,Thanks for the guidence."
5 hours ago
Scott H replied to Liam Nash's discussion What is this?
"Looks like one of those washers that holds the outer covers on the roller mowers. Think its correct name is a cover setting washer.
You should be able to look it up on one of the Honda spares websites - here is one I use
https://www.lingshondaparts.…"
6 hours ago
Liam Nash’s discussion was featured
Hi all I have lost one of these for my honda lawnmower and cant seem to find out what they are anywhere could anyone help?Many thanks in advanceLiam
7 hours ago
Jim Gibbon replied to David Green's discussion Removing Stumps - small tree/large bush
"There are a few You Tube videos of taking out stumps with a high lift jack. It has worked for me a few times but I'm not sure you'll have enough stump left for the chain to grip."
9 hours ago
Richard Gadsby replied to James's discussion What is average cost for mowing a garden?
"if I had to pick one of my mowers now it would be the weibang pro 48 bbc"
9 hours ago
Richard Gadsby replied to James's discussion What is average cost for mowing a garden?
"I use lawnflite pro, weibang pro, Honda pro, etesia, Ransomes and toro.What I use isn’t really the point any of the big brands are ok it’s more down to personal choice. 
If you are busy with non grass cutting then fine (though a decent roller mower…"
9 hours ago
David Green replied to David Green's discussion Removing Stumps - small tree/large bush
"I bought a similar one a while back and it was great digging up the laurel with it's roots etc.
But this tree with it's roots is a tough bugger to get through,it's a bit "elasticy " when I try and cut with the post hole digger. I was pretty knackere…"
10 hours ago
More…