LJN Blog Posts

PRO Supplier

Oeliatec return to SALTEX on stand number E055 to showcase their range of environmentally-friendly range of weed control products.

All Oeliatec weed control machines kill weeds with 100% hot water by delivering an efficient low pressure treatment at temperatures of up to 120°C.

This destroys the cellular structure of the weed to kill off the plant. The intense heat penetrates deep into the root system killing the plant from the leaf down to the root. It is effective with all broad leaf plants and grass along with moss and algae which can also be removed at the same time.

With five models available, customers will not only be able to control weeds, moss and algae but also remove graffiti and chewing gum from streets, paths and walk ways.

Leading groundscare machinery distributor Etesia UK has taken on the distribution for the Oeliatec environmentally-friendly weed control range in the UK and Ireland.

Visitors to the show will be able to view a range of products and talk to knowledgeable staff about environmentally-friendly weed control and collect the latest product information booklets.

For further information, please contact Oeliatec UK on 01295 680120 or visit www.oeliatec.co.uk

You need to be a member of Landscape Juice Network to add comments!

Join Landscape Juice Network

Highlighted blog posts

Open forum activity

Benedict Simmons liked Robbie's blog post How to Revive a Worn Out Lawn
14 minutes ago
John Fulton replied to dan's discussion biodegradable weed control fabric
"Absolutely hate the stuff , weed seeds tend to germinate on the surface anyway , I tend to mulch around the base area of the new planting to try and surpress weed growth the new planting tends to expand more quickly and i also use a flat bottom wolf…"
1 hour ago
Jonathan Smith is now a member of Landscape Juice Network
4 hours ago
dan replied to dan's discussion biodegradable weed control fabric
" looking at alternatives to fit in with a more organic request -- and endless digging isnt viable
general weed supressing membranes are great but dont allow for the spreading nature of some plants or the later infilling with bulbs "
4 hours ago
Graham Taylor replied to dan's discussion biodegradable weed control fabric
"Isn't it easier to just delay the planting, let the weeds grow and then spray the lot with Roundup?"
5 hours ago
Chris replied to Anthony Toop's discussion Etesia pro46 belt change
"Crikey wasn’t aware, thanks Neal :)"
5 hours ago
dan replied to dan's discussion biodegradable weed control fabric
"yes -- and it looks as if jute doesnt have the strength to stop some weeds 'breaking through' -- they advise a total erradication of weeds prior to laying which kinda seems to destroy the point."
6 hours ago
Norms replied to dan's discussion biodegradable weed control fabric
"I’m not clued up on the weed barrier but some I’ve seen you can see light through it so I’m sure weeds will grow any way so check that by holding it up to the light"
6 hours ago
Russ Francis replied to Darren Walters's discussion Keeping up with doing quotes
"I know the feeling Darren, I have a similar problem following up with doing quotes if I leave them until after the site visit.  Never find time to get them done !  I find it better to give a price on the spot when I can, and then you can tell from t…"
6 hours ago
Neal Barker @ Etesia uk replied to Anthony Toop's discussion Etesia pro46 belt change
"Good Points there Chris,
just remember when using copper slip on crank shafts to apply it to the inside of the pulley / blade break systems etc and ensure the slip reaches no further than needed, copper slip will wear out the oil / grease seal of an…"
6 hours ago
dan posted a discussion
Does anyone have any experience using  biodegradable weed control fabrics? There seems a lot of different options : from essentially rolls of paper / cardboard to mulch films ( 3-8 months degrade) , Jute mattings -- expensive ? degrades 18 months -…
8 hours ago
Darren Walters posted a discussion
Having looked through some threads from last year, there were a few of you guys who were going to start using either quickbooks or Xero with Jobber.We are now at that crossroads, so could you folks give us an update on how you got on and your though…
11 hours ago
Chris replied to Anthony Toop's discussion Etesia pro46 belt change
"PS: remember to remove piston stop before trying to pull start it afterwards :j"
20 hours ago
Chris replied to Anthony Toop's discussion Etesia pro46 belt change
"I’ve just finished changing the drive belt on my Pro51K, happy to share thoughts, etc. if anyone’s doing the job too.  Neil’s comments above were excellent and a great help. To be clear: (1) the bolt in the Center, once the blades removed, is the ri…"
20 hours ago
Green and Pleasant updated their profile photo
yesterday
Seth Burgess replied to Matt Hallett's discussion Stiga Twin Clip Mowers
"I use a Stiga Twinclip 55 (the 3 in 1) and it mulches as good as any dedicated mulcher I've ever used. I highly rate them."
yesterday
More…

Tethering A Runaway

I have been specialising in stump grinding for the past 18 years throughout Anglia.  Over that time period I have experienced  loss of drive to the wheels on a number of occassions while on site (a real bummer) and twice while up/down loading from…

Read more…
5 Replies · Reply by Mike Lish on Saturday