LJN Blog Posts

PRO Supplier

Dennis and SISIS have announced that they will be hosting a cricket renovation event at St Albans School, Woollam Trust Playing Fields on Tuesday 18 July 2017.

This event follows on from the hugely successful ‘For the Groundsmen by The Groundsmen’ series of seminars that started in 2011 and have brought together groundstaff representing schools, universities, clubs and 1st class and test match venues around the country with the ultimate aim of enhancing their education.

The event will be a mix of indoor presentations and outdoors practical sessions.

The day will commence with indoor presentations from Chris Wood (ECB Pitch Consultant), Alex Vickers, Keith Exton and Rob Kendle covering key topics such as ‘Principles of decision making for Autumn renovations and profile reading’, ‘profile inspections’, ‘renovations and aeration’.

Outdoor practical sessions will be across three squares with each square discussing individual topics, renovations and preparation on a budget, contractor renovations and aeration. These will be hosted by Ian Smith, Andy Clarke, Rob Kendle and Keith Exton supported by event sponsors Dennis & SISIS, Boughton Loam, cricketworld.com, Durant Cricket, Ecosol, Headland Amenity, Limagrain, Poweroll and RT Machinery.

There is no charge for attending and all delegates will receive a complimentary lunch.

To register your interest please contact Roger Moore at Dennis & SISIS on 01332 824777 or email roger.moore@dennisuk.com.

Further information about the range of maintenance products available can be found by visiting www.dennisuk.com / www.sisis.com

You need to be a member of Landscape Juice Network to add comments!

Join Landscape Juice Network

Highlighted blog posts

Open forum activity

Russ Francis replied to Darren Walters's discussion Keeping up with doing quotes
"I know the feeling Darren, I have a similar problem following up with doing quotes if I leave them until after the site visit.  Never find time to get them done !  I find it better to give a price on the spot when I can, and then you can tell from t…"
6 minutes ago
Neal Barker @ Etesia uk replied to Anthony Toop's discussion Etesia pro46 belt change
"Good Points there Chris,
just remember when using copper slip on crank shafts to apply it to the inside of the pulley / blade break systems etc and ensure the slip reaches no further than needed, copper slip will wear out the oil / grease seal of an…"
7 minutes ago
dan posted a discussion
Does anyone have any experience using  biodegradable weed control fabrics? There seems a lot of different options : from essentially rolls of paper / cardboard to mulch films ( 3-8 months degrade) , Jute mattings -- expensive ? degrades 18 months -…
1 hour ago
Darren Walters posted a discussion
Having looked through some threads from last year, there were a few of you guys who were going to start using either quickbooks or Xero with Jobber.We are now at that crossroads, so could you folks give us an update on how you got on and your though…
4 hours ago
Chris replied to Anthony Toop's discussion Etesia pro46 belt change
"PS: remember to remove piston stop before trying to pull start it afterwards :j"
13 hours ago
Chris replied to Anthony Toop's discussion Etesia pro46 belt change
"I’ve just finished changing the drive belt on my Pro51K, happy to share thoughts, etc. if anyone’s doing the job too.  Neil’s comments above were excellent and a great help. To be clear: (1) the bolt in the Center, once the blades removed, is the ri…"
13 hours ago
Green and Pleasant updated their profile photo
19 hours ago
Seth Burgess replied to Matt Hallett's discussion Stiga Twin Clip Mowers
"I use a Stiga Twinclip 55 (the 3 in 1) and it mulches as good as any dedicated mulcher I've ever used. I highly rate them."
23 hours ago
Graeme Brown replied to Matt Hallett's discussion Stiga Twin Clip Mowers
"I have the husqi mulch mower as well a great work horse. Keep the blade really sharp and the finish is excellent."
yesterday
Angela Sharp replied to Darren Walters's discussion Keeping up with doing quotes
"I don't know what sort of range of jobs you are quoting for but I base what I do on the amount of time it's going to take. Most people would say you should over-estimate time if you are quoting for tasks, that's partly why I quote for number of hour…"
yesterday
Angela Sharp replied to Oliver clarkson's discussion Apple tree repair
" Shame about this one, but most apple trees which you can expect a crop from can be quite young so it's certainly worth replanting and starting again. If the client invests in a reasonable size tree it'll be cropping in no time. "
yesterday
Anthony Toop updated their profile
yesterday
Anthony Toop replied to Jason Creed's discussion Resin Cleaner
"Ive used the spray on brake cleaner in the past, but more as a major clean up before applying lubricant, it works well but leaves the blades bone dry as it removes oil and grease obviously.It's ok on plastic and rubber as its designed to be non aggr…"
yesterday
John Fulton replied to Craig Campbell's discussion How did you start?
"Nice one Graeme , I know there is a saying  '' fail to plan''  and you '' plan to fail ''  obviously some truth in this but I have found in business the best opportunities and catalysts which have come my way have been down to chance meetings and fi…"
yesterday
Lee Foster replied to Oliver clarkson's discussion Apple tree repair
" Definately remove and re-plant.
It is always a shame when a nursery is prepared to let someone buy a poor specimin like this in the first place - at least if you go and choose one, you will make sure it does not have co-dominent leaders!"
yesterday
John Fulton replied to Jason Creed's discussion Resin Cleaner
"Just recently purchased a new Stihl Hedge trimmer and had opted for Motor bike chain cleaner OXZ ring compatible which i intend to spray onto the blades after use , It's supposed to blast off contaminants in seconds and stubborn areas can be brushed…"
yesterday
More…

Tethering A Runaway

I have been specialising in stump grinding for the past 18 years throughout Anglia.  Over that time period I have experienced  loss of drive to the wheels on a number of occassions while on site (a real bummer) and twice while up/down loading from…

Read more…
5 Replies · Reply by Mike Lish yesterday