Forum

tanaka pole saw

Hi. I wonder if someone could help? I have been asked to quote for a hedge job. Its hawthorn approx 10 ft high and 50/60 foot long. I have a tanaka long reach hedge cutter but the hawthorn is thick at the top. The hedgecutter attatchment wouldnt cut it so to speak (no pun intended) i have been consideribg getting a pole saw attatchment and wondered if you can angle these to cut the top of a hedge? Or is it just for tree branches and isnt adjustable? If you can angle it would it be the best tool for the job. Ps i dont have a chainsaw. Thanks

You need to be a member of Landscape Juice Network to add comments!

Join Landscape Juice Network

Email me when people reply –

Replies

  • PRO
    I topped a hedge today using a pole saw for most of it. I just got up the ladder and used it as if it was a long reach hedge cutter.
    You could cut a section of the hedge with loopers to get started which would make it easier to use the pole saw.
    • Thanks Niall. Do you know if the tanaka saw is adjustable? The hedgetrimmer attatchment can be angled say at 90 degrees. I have a platform ladder but dont think it is high enough to use at waist height which I think i would need to if it only works horizontally. If you get what i mean.
      • PRO
        Just looked it up and it isn't. I think sthil do one that is angled but to be honest I don't think it help that much. How much are you taking off the hedge? How wide is it?
  • PRO
    If you don't have a chainsaw the pole saw is best simply because you are less likely to hurt yourself than with a normal chainsaw!
    My pole saw attachment is ok but does not bend over like a long reach hedge cutter. I normally use the normal saw unless the hedge is really wide.
    To be honest with thick overgrown hawthorn I'd be tempted just to use loppers for the thick stuff and then tidy with a hedge trimmer as you may find the branches wobble about too much for a chainsaw or pole saw
    • Thanks Richard. There is quite a lot of thick branches at the top so i think using loppers a pruning saw etc would take a long time. Its about 50 to 60 feet long. You are right about the chainsaw i dont trust myself with one. Hence thinking about investing in the tanaka pole saw attatchment.
      • PRO
        Also the pole saws are generally ok for the thick stuff but if you get any leaf matter or conifer needle type stuff in it they do clog easily meaning strip down and put back together which is easy enough but does take time. A few clog ups and you blow half and hour clearing them.
        Also you really need to be seeing what you are trying to cut so the 90 degree twist would not do you much good anyway
      • PRO

        Depending upon the width of the hedge you could use a reciprocating saw instead, the pole saw could be difficult to use not just because you need to use it horizontally, but also when 'engaging' the wood  if the stems move about a lot.

This reply was deleted.

Industry Jobs

Help us to build luxury climbing frames and treehouses

Overview This is a fantastic opportunity for a carpenter or a skilled outdoor landscaper with good wood skills to join our team. We are a small yet growing high-end manufacturer and installer of amazing climbing frames, tree houses and zip wires. We’re seeking an installer based in the SE to join the team and cover

Mechanic & Service Support Engineer

Working with a team of dedicated hard working enthusiasts in the Grass & Groundcare machinery industry the successful applicant will be responsible for undertaking the build up, pdi, servicing and repairs of a range of grounds machinery. With a range of ability’s and attributes allowing you to work under your own initiative diagnosing and repairing

Grounds Maintenance Operative

GROUNDS MAINTENANCE OPERATIVES Our client based on the beautiful Jurassic coast is a successful, growing and ambitious organisation providing grounds maintenance services across Dorset and landscaping and safety surfacing throughout the South West. They are a forward thinking company with innovative plans to develop in the future. They are looking to recruit a number of

HARD LANDSCAPE TEAM LEADER

We are urgently looking for experienced hard landscapers capable of leading a team and turning plans into finished gardens. Immediate start and good rate of pay for the right person. We are members of the Association of Professional Landscapers and a Marshalls registered installer so an eye for detail and top quality finish are essential.

Latest blog post

PRO

How to Revive a Worn Out Lawn

Is your lawn weedy, mossy, baldy or just plain tired looking? In this blog we’ll show you how to revive your worn out lawn and make your neighbours turn green with envy.

 

Ireland is one of the best countries in the whole world…

Read more…
Comments: 0

Trade green waste centres

If you've received help from the Landscape Juice Network and you'd like to say thank you, why not make a small donation?

The site is maintained as an indpendent industry resource and it's become an essential tool for those working in the landscape industry.

Thank you

Phil Voice

Founder Landscape Juice

Make a donation

LJN Sponsor

Advertising

Blogs

PRO

How to Revive a Worn Out Lawn

Is your lawn weedy, mossy, baldy or just plain tired looking? In this blog we’ll show you how to revive your worn out lawn and make your neighbours turn green with envy.

 

Ireland is one of the best countries in the whole world…

Read more…
Comments: 0
PRO

In the first of a several part blog that we are writing, we will explain some of the terms that are often used in lawncare service leaflets and by contractors but many of you out there may not actually understand what they mean!…

Read more…
PRO Supplier

Nothing but MM50 for Sportsturf Management

Following a successful trial, Jamie Foyster - owner of Sportsturf Management, has now chosen to exclusively use Limagrain’s MM50 grass seed across every single cricket square he tends to.

It is safe to say that Jamie Foyster knows a…

Read more…