WYEVALE Nurseries in Hereford is this month (September, 2015) taking its first Amenity/Landscape focused stand to the Four Oaks Trade Show.

The company will be showcasing its extensive range of plant material grown for the amenity market, landscape contractors, garden designers and trade nurseries at the show on September 8 and 9.

Adam Dunnett, Sales and Marketing Director at Wyevale Nurseries, said: “We’re so excited to be having our first Amenity/Landscape focused stand at the Four Oaks Trade Show in Macclesfield.

“Last year saw a resurgence in the residential and the related construction market, the biggest since 2008, demanding a top quality finished product supplied to very tight deadlines.

“Shorter lead times and the move from winter planting to all year round often means that where a field grown product was required the same product must now be sought in container. One of our strengths is that we can offer an equivalent all year round supply of product.

“At the trade show special focus will be given to our container tree product as a point of difference. This range is particularly useful as a lead in for field grown stock, covering the gap in supply, expanding the planting season.

“Pleached trees and true multi stems will be exhibited along with pre-formed hedging in troughs for instant impact planting solutions. Visitors to the show will be able to see for themselves samples from our ‘Select’ tree range – varieties we have developed to produce strong much improved forms of their predecessors.”

Product development and innovation is always a top priority at Wyevale Nurseries and customers can be assured of an ever evolving range in both variety type and presentation form.

Adam added: “We are the only one of the larger UK nurseries that actually grows the whole range of nursery stock – basic field-grown seedlings and transplants through to standard trees, both field and containerised, the whole range of container ornamentals, topped off with specimens. We pay attention to the detail – seed provenance selection, new varieties, production methods and all grown to the National Plant Specification Standards.

“Thus we are in the best position to supply the trade, having something of everything here actually growing on-site, ready for spontaneous demand. Heading each of the production divisions is a Director with more than 25 years’ experience of growing at Wyevale. We are a wholesale nursery, with a sales team and nationwide transport to match. We are up for one-off supply or a regular delivery schedule.”

Wyevale Nurseries is one of the largest family-run wholesale nurseries in the UK. It was established in 1930 by Harry Williamson, a horticulturist and entrepreneur. It became the company it is today under the leadership of his son, Peter, who sadly passed away in 2011.

The Williamsons’ saw the opportunity to sell their product to an undeveloped retail market, creating one of the first garden centres, followed by a chain. In 1987, the retail side needed to expand and the 19 garden centres were sold as a PLC.

The family then turned its focus to Wyevale Nurseries Ltd. It continues to be a family-run business with ownership and joint chairmanship currently being held by the third generation, Heather and Simeon Williamson, with plans for the fourth generation to takeover in the future.

Wyevale Nurseries has a significant product range and is regularly introducing new plants. It offers a large variety of trees, shrubs, hedging, herbaceous and specimen plants to garden centres, landscape contractors, local authorities, foresters and landowners.

Votes: 0
E-mail me when people leave their comments –

You need to be a member of Landscape Juice Network to add comments!

Join Landscape Juice Network

Open forum activity

Ben Carter replied to Jamie's discussion Stihl BG86c problems
"Sell it and buy a new one.  Mine went like that I messed about with it still didn't work. Not worth the hassle.  "
2 hours ago
Adam Pilgrim replied to Jamie's discussion Stihl BG86c problems
"I am assuming you checked the crankshaft main bearings aren't collapsing? They are a stupidly common failure on these and the three blowers I have exhibited similar symptoms (start/die or rough/lumpy running/hard to pull recoil)...
I had one that…"
3 hours ago
Oliver clarkson posted a discussion
Evening what products are people using for black spot on roses, I'm about to run out of my current product which isn't available any more. many thanks 
18 hours ago
Graham Taylor replied to Jamie's discussion Stihl BG86c problems
"I just use a couple of pieces of paper for the gap and then just rotate the flywheel to ensure its not rubbing anywhere.  I set it up when the magnets are pulling the coil onto it with the paper as a sandwich between the two..................holds…"
18 hours ago
Honey Badger replied to Jamie's discussion Stihl BG86c problems
"You're welcome. 
Im glad you got it working again."
20 hours ago
Jamie replied to Jamie's discussion Stihl BG86c problems
"Thank you for your replies. As it happens, i just re-alligned the ignition coil slightly just to get it slightly closer to the fly wheel as i noticed one side had a bigger gap than the other, and fingers crossed it's been ok today so far. It does…"
22 hours ago
Honey Badger replied to Jamie's discussion Stihl BG86c problems
"Replace there wiring you've probably worn out the kill switch. If it is a flywheel problem stop yanking the pull chord so hard, thats what shears of the flywheel key. I've had three bg86 they get a bit unreliable after 4-5 yrs. They all still run,…"
yesterday
John F replied to John F's discussion Service Schedule Stihl Cordless Hedge Trimmer ?
"Thanks Tim for the useful information , definitely worth mentioning also useful reminder to grease the gears regularly  
I must admit I sometimes forget with my more expensive kit which has the grease thread the grease soons dries out .
My Stihl…"
yesterday
Honey Badger replied to Jamie's discussion Stihl BG86c problems
"Get the flywheel off is tricky. Strip down both sides of the machine there's two opposing compression nuts you have to loosen the one on the fly wheel side. Use a punch and hammer to gently slide of the compression nut, there's a centre point the…"
yesterday
Honey Badger replied to Jamie's discussion Stihl BG86c problems
"Use a piece of cut plastic milk bottle to get the space right between the ignition coil and flywheel. The flywheel could be the problem. There's key on the flywheel that shears off and knocks the engine timing off. You have to remove the flywheel…"
yesterday
Tim Bucknall replied to John F's discussion Service Schedule Stihl Cordless Hedge Trimmer ?
"All the stihl kit I've got has grub screws for greasing, and stihl do grease in tubes like toothpaste.  Take the screw out (torx) and screw the tube in, squeeze some in.  Should be done quite regularly.  Also on shaft drive machines you should take…"
yesterday
Jamie posted a discussion
Hi all, hope this is in the correct thread.So i've had some BG86c blower problems recently. Long story short, i've replaced the carb with a genuine Stihl carb as my previous one wasn't priming, everything was fine once replaced but on full throttle…
yesterday
Honey Badger replied to John F's discussion Cherry Blossom Tree
"If it's right by a boundary wall it sadly needs to come out. Cherries are one of the worst for causing subsidence. People Are such idiots when it comes to planting tree's."
Thursday
John F replied to John F's discussion Cherry Blossom Tree
"Yes it's not always easy to do the right thing for the tree unfortunately whoever planted it put the wrong tree in the wrong place right next to a boundary wall when it was just a small tree .
Once it's pruned I  can't see it adding any value as it…"
Thursday
Peter sellers replied to Ben Hattersley's discussion Pricing for School grounds maintenance
"Ben, seems that you are in a strong position as you are well thought of by the school as you aren't the obvious choice to quote for something which is not your main business. Are they asking other contractors who do this type of work to quote? If…"
Thursday
Ben Hattersley replied to Ben Hattersley's discussion Pricing for School grounds maintenance
"Yes it seems to be mine field! The school arent happy with the current contractors and to be honest i wouldn't be either. The main concerns of the school are that they are paying for the contract but very little gets done.
Because i try stay away…"
Wednesday
More…

Stihl BG86c problems

Hi all, hope this is in the correct thread.So i've had some BG86c blower problems recently. Long story short, i've replaced the carb with a genuine Stihl carb as my previous one wasn't priming, everything was fine once replaced but on full throttle…

Read more…
8 Replies · Reply by Ben Carter 2 hours ago
Views: 131