PRO Supplier

New Pellenc dealer in Cambridgeshire

Etesia, the exclusive distributor of Pellenc battery-powered equipment in the UK, has announced the appointment Scamblers who will now be distributing Pellenc’s complete product range in the Cambridgeshire area.

Scamblers was first established in 1974 and the family owned business specialise in supplying compact tractors, bank tractors, mowers, utility vehicles and turfcare and groundcare machinery for every aspect of turf and grounds maintenance.

Having seen the emergence of battery powered equipment over recent years, sales director Ed Scambler, admits that it has been a case of trial and error in selecting the ideal range of equipment suitable for his customers who operate in the commercial market.

“We have tried working with a number of different battery and cordless manufacturers,” he says.

“We’ve known about Pellenc since it first came into the country and we believe it has set the industry standard – it really is at the top end of the market. Until now there hadn’t been an opportunity to distribute Pellenc products so we are absolutely delighted to be working with them. It’s a truly professional brand and with a 3 year warranty on products and fantastic customer support, we know that we are in good hands – which in turn means our customers will be.”

As Ed says, the addition of the Pellenc range of equipment will present Scamblers’ customers with a lighter, odourless, noise-free and more cost effective alternative to petrol powered machinery. Pellenc has developed the most comprehensive range on the market leading the way in terms of performance, lightness and durability. The extensive product range features an impressive portfolio - from chainsaws, pole saws and hedge cutters to grass strimmers, brushcutters and mowers.

Not only will users be able to comfortably achieve a full day’s work without having to re-charge the battery but they will see a huge amount of savings by eliminating the necessity of purchasing fuel. Furthermore, users will be contributing to protecting the environment by reducing the consumption of fossil fuels and noise pollution – something which Ed believes will be of huge benefit to his customers in Cambridgeshire.

“We are looking forward to promoting the green credentials, not only pollution in terms of fumes but noise pollution as well. Within Cambridge we have a lot establishments where noise pollution can be just as disruptive and as damaging as the fumes. With that in mind we can see the Pellenc brand being ideal for our customers who operate in universities, parks, hospitals and schools.

“There is a growing demand for green technology and equipment like Pellenc is the future.”

For further information, please contact Etesia UK on 01295 680120 or visit www.etesia.co.uk where you can also find more information on Pellenc which is sold exclusively in the UK by Etesia UK.

Votes: 0
E-mail me when people leave their comments –

You need to be a member of Landscape Juice Network to add comments!

Join Landscape Juice Network

Open forum activity

Ben Carter replied to Jamie's discussion Stihl BG86c problems
"Sell it and buy a new one.  Mine went like that I messed about with it still didn't work. Not worth the hassle.  "
26 minutes ago
Adam Pilgrim replied to Jamie's discussion Stihl BG86c problems
"I am assuming you checked the crankshaft main bearings aren't collapsing? They are a stupidly common failure on these and the three blowers I have exhibited similar symptoms (start/die or rough/lumpy running/hard to pull recoil)...
I had one that…"
27 minutes ago
Oliver clarkson posted a discussion
Evening what products are people using for black spot on roses, I'm about to run out of my current product which isn't available any more. many thanks 
15 hours ago
Graham Taylor replied to Jamie's discussion Stihl BG86c problems
"I just use a couple of pieces of paper for the gap and then just rotate the flywheel to ensure its not rubbing anywhere.  I set it up when the magnets are pulling the coil onto it with the paper as a sandwich between the two..................holds…"
15 hours ago
Honey Badger replied to Jamie's discussion Stihl BG86c problems
"You're welcome. 
Im glad you got it working again."
17 hours ago
Jamie replied to Jamie's discussion Stihl BG86c problems
"Thank you for your replies. As it happens, i just re-alligned the ignition coil slightly just to get it slightly closer to the fly wheel as i noticed one side had a bigger gap than the other, and fingers crossed it's been ok today so far. It does…"
19 hours ago
Honey Badger replied to Jamie's discussion Stihl BG86c problems
"Replace there wiring you've probably worn out the kill switch. If it is a flywheel problem stop yanking the pull chord so hard, thats what shears of the flywheel key. I've had three bg86 they get a bit unreliable after 4-5 yrs. They all still run,…"
23 hours ago
John F replied to John F's discussion Service Schedule Stihl Cordless Hedge Trimmer ?
"Thanks Tim for the useful information , definitely worth mentioning also useful reminder to grease the gears regularly  
I must admit I sometimes forget with my more expensive kit which has the grease thread the grease soons dries out .
My Stihl…"
yesterday
Honey Badger replied to Jamie's discussion Stihl BG86c problems
"Get the flywheel off is tricky. Strip down both sides of the machine there's two opposing compression nuts you have to loosen the one on the fly wheel side. Use a punch and hammer to gently slide of the compression nut, there's a centre point the…"
yesterday
Honey Badger replied to Jamie's discussion Stihl BG86c problems
"Use a piece of cut plastic milk bottle to get the space right between the ignition coil and flywheel. The flywheel could be the problem. There's key on the flywheel that shears off and knocks the engine timing off. You have to remove the flywheel…"
yesterday
Tim Bucknall replied to John F's discussion Service Schedule Stihl Cordless Hedge Trimmer ?
"All the stihl kit I've got has grub screws for greasing, and stihl do grease in tubes like toothpaste.  Take the screw out (torx) and screw the tube in, squeeze some in.  Should be done quite regularly.  Also on shaft drive machines you should take…"
yesterday
Jamie posted a discussion
Hi all, hope this is in the correct thread.So i've had some BG86c blower problems recently. Long story short, i've replaced the carb with a genuine Stihl carb as my previous one wasn't priming, everything was fine once replaced but on full throttle…
yesterday
Honey Badger replied to John F's discussion Cherry Blossom Tree
"If it's right by a boundary wall it sadly needs to come out. Cherries are one of the worst for causing subsidence. People Are such idiots when it comes to planting tree's."
yesterday
John F replied to John F's discussion Cherry Blossom Tree
"Yes it's not always easy to do the right thing for the tree unfortunately whoever planted it put the wrong tree in the wrong place right next to a boundary wall when it was just a small tree .
Once it's pruned I  can't see it adding any value as it…"
yesterday
Peter sellers replied to Ben Hattersley's discussion Pricing for School grounds maintenance
"Ben, seems that you are in a strong position as you are well thought of by the school as you aren't the obvious choice to quote for something which is not your main business. Are they asking other contractors who do this type of work to quote? If…"
Thursday
Ben Hattersley replied to Ben Hattersley's discussion Pricing for School grounds maintenance
"Yes it seems to be mine field! The school arent happy with the current contractors and to be honest i wouldn't be either. The main concerns of the school are that they are paying for the contract but very little gets done.
Because i try stay away…"
Wednesday
More…

Stihl BG86c problems

Hi all, hope this is in the correct thread.So i've had some BG86c blower problems recently. Long story short, i've replaced the carb with a genuine Stihl carb as my previous one wasn't priming, everything was fine once replaced but on full throttle…

Read more…
8 Replies · Reply by Ben Carter 26 minutes ago
Views: 90